Updating ubuntu eee
This guide works 100% for Windows 7 and Windows 8 unlike most of the guides out there.I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide.If you know that the AC adapter is working properly and it outputs correct voltage but the laptop is still dead, most likely you have a power issue on the motherboard (or power board on some laptops) and it has to be replaced.If you have to replace the AC adapter, make sure you use a correct one.
If the laptop starts fine with one memory module in both slots, but will not start with the second memory module in both slots, the second memory module is faulty. If the laptop starts fine with both memory modules when they are installed in the slot A, but will not start with both memory modules installed in the slot B, the slot B is faulty and you’ll have to replace the motherboard or use only one memory slot. In this situation test the memory module as I described in the situation2. Most likely you are getting a beep error because of a faulty memory. In this situation test the laptop with an external monitor. Also this problem might appear because of a faulty memory module, try some tips from the situation 2.I just did this method on one of my friends machine and installed Windows 7 and Windows 8 .